how to setup setek wifi range extender

SETEK Extender Description

SETEK Extender Setup is super easy and provides an ultra-fast connection in your homes, offices or business places. It tremendously increases the Internet speed in your dead zones. You just need to press and hold WPS on your configured/working router and repeat the same process on your SETEK ultra wifi range extender. This SETEK extender is equipped with 4 high-speed antennas which makes sure you get 300mbps of speed to seamlessly surf the Internet. Now you can easily connect your smart tv, gaming console, firestick etc with an ethernet cable to this SETEK ultra extender. It is designed to fit any interior and connect with any device you have like windows, Mac, iOS, android, security camera, Roku, etc.

Setup SETEK Wifi Extender Setup via WPS

1. Plug your Extender in the same room as your router, this will help for faster connection through WPS.
2. Wait until you have a solid green light on the extender.
3. Now press and hold the WPS on the setek extender for around 2 seconds, repeat the same procedure on your router.
4. Now you will see blinking WPS light both on your extender and router. It hardly takes 10-15 seconds for extender to get connected with the router.
5. Once connected the WPS light on the setek ultra wifi range extender will turn to solid green.
6. You can now unplug your extender and place it at the location where you need Internet Connectivity.

NOTE:- Place the Extender within the reach of the router.

1. For better connectivity place setek away from big appliances like Ac, microwave ovens, etc.

How to Setup Setek WiFi Range Extender via 192.168.10.1

1. You can plug extender near or even away from the router while doing web-based setup through 192.168.10.1.
2. Once you have a solid green light on the power you can go ahead for the Setup.
3. Grab any of your wireless device like i-phone, Mac, laptop etc any open settings and go to WiFi settings.
4. In your WiFi list, you will find your Setek Wireless Network showing up as “WIRELESS N” Network92
5. Hit the and get connect to WIRELESS N, it will show as open/unsecured network.
6. After this open a browser on the same device and in the address bar type 192.168.10.1 which will take you to setek extender setup.
   NOTE:- If 192.168.10.1 doesn’t work try resetting the extender or change the browser or else try using different cellphone or computer.
7. Follow the on-screen instructions and then it will scan the networks.
8. It will show you all the available networks, you will have to select the main WiFi Network that you want to extend.
9. Type in the password for the network that you have selected.
10. Once Setek extender setup is complete the WiFi light on the extender will turn solid green.
11. Now you can unplug it and place it within the reach of your router.
12. It takes around 60 seconds for the extender to boot up properly.
13. For better Internet connectivity place the extender away from big appliances like microwave etc.