Jul 9 2022

How Can I Do the Nextbox WiFi Extender Setup?

The Nextbox WiFi Extender is an immense wifi networking system. It gives an impeccable connection to up to 30 devices. The Nextbox N300 boost range extender is one of the best devices for extending the wifi network of your host device in dead areas. It is a single way to extend your main router signal coverage in congested locations.

Apart from this, the Nextbox repeater also gives you a boosted network in dark locations. It has two internal high-range antennas that transform the network range into an increased signal network. The nextbox wifi extender setup is overwhelmingly too easy as compared to others.

The setup of the Nextbox extender is possible through the web browser, WPS, or with a wired connection. If you would like to set it up through a browser, just type in the web portal search box http //re.nextbox.home login. It lets you instantly access the Nextbox login admin page.

Furthermore, through the Nextbox extender, you get a 2.4GHz band network up to 300Mbps and a 5GHz band network up to 867 Mbps coverage or faster speed. You can enjoy wide wireless and LAN connections through this device since both are included in this device.

As well as you are liable to hook up lots of devices with this repeater very effortlessly. You can use its two LAN ports for a wired connection. You obtain the full network range of this extender network in the 3000sq.ft area.

Nextbox WiFi Extender Setup

The Nextbox wifi extender setup is too easy in comparison to others. Following are the steps which help you to install it, access its login admin page, and configure its settings. So, let’s start the Nextbox extender setup process without any further ado.

1. Nextbox Extender Installation Steps

Here are the steps given below to install the Nextbox wifi extender in your home. Basically, it will help your router to reach its signal range in your home every corner. So, let’s get started.

In the beginning, you have to unbox it.
Locate a proper network signal location.
Keep it there and hook up with the power source and with your router network.
Take the power cable out of its packaging box and make sure it is not damaged, otherwise, it may cause problems.
So, verify its cable and power socket suitably and hook up this power cable at both points with your power socket and with your range extender.
Now, wait till the signal LED does not blink.
When it initiates blinking, then ensure that your extender has to keep an equal distance from your main device and your other wifi-enabled devices.
Obviously, your router will already be connected to power and its internet will also be working fine.
So, now you will connect your Nextbox wifi extender with your router network.

2. Connect router wifi to the extender

Here are the steps to connect your extender with the main device’s wifi network. It is given below.

Now, you need to connect the Nextbox wifi extender with your main device network. Because this wifi extender is of no use without connecting it with the main device wifi.
So, to hook up your extender with your main device, either you can use an Ethernet connection, WPS connection, or you can use a web user interface method.

(i) Nextbox Extender Setup Using Wired Connection

You can easily and directly connect your main device and range extender just with a wired connection.
To do it, you will take an Ethernet cable from the packaging box.
Make sure it is not damaged, otherwise, it will show the Nextbox not working issue.
If it’s ok, you will connect one Ethernet cable point with your extender LAN port and another port is connected with your main router LAN port.
It is easy to connect the Nextbox extender with the router.
So, after a minute, it will connect automatically with your main device.
As this, the internet signal lights of the Nextbox extender also start amber and then flash when it will get the proper signal range of your main router.
Lastly, your NextBooks WiFi setup is now finished, you can now connect to its network with devices in congested locations

(ii) Nextbox Extender Setup Using WPS Button

Make sure that both the devices are connected to the power in the right place.
Thereafter, located on your main router a WPS button to look up its network with your range extender.
Also, locate your Nextbox extender WPS button to establish the wifi network.
Push this button just for 2 to 3 minutes and keep holding it.
Similarly, press another range extender WPS button.
When the range extender is connected to your main device network, its signal light will blink adequately.
After making a wifi connection, you can use its network and use it to finish your all needs without networking locations.

(iii) Nextbox range extender setup with user interface

Following are the ways to connect your Nextbox with your router wifi using the user interface. All these steps are given below.

Go on the web page after connecting your mobile phone with your Nextbox range extender.
While you connect its network through wifi settings, it will show you that the Nextbox is connected, but no internet.
So, to hook up your range extender with your main device, you need to configure its settings through the browser.
It will show you two options there, one is managing its network settings with properties or another is configuring its network settings through the browser.
You will choose the Nextbox setup via the user interface.
It directly walks you through its web page or you can go directly on its web page by using http //re.nextbox.home.
Search it and log in to your account by entering the Nextbox login credentials in the admin box.
After that, go on the wifi configuration page to connect it with your host device network.
You will locate your host device network name from the available networks name and choose it to connect its network with your range extender.
Emulate the on-screen instructions to finish the Nextbox extender wifi setup process.
So, these are the following steps to configure the wifi extender with your wifi router network.

Steps for the Nextbox Extender Login

Below are the following steps given to accessing the Nextbox extender admin page, just by using these following steps.

Search in the web browser search bar http //re.nextbox.home login. It helps you to easily access your Nextbox range extender home page.
If you would like to log in to your wireless range extender admin page then click on the Nextbox login option.
The Nextbox extender login box will demonstrate on your device screen.
Enter your device Nextbox wifi extender login username and password.
Cross-check both the entered details and then tap on the login option.
Wait till the nextbox extender login confirmation message does not appear on your computer screen.
Once it’s done, you will be liable to manage and configure your nextbox range extender in another setting.
Through the nextbox wifi extender setup page, you can easily set your Nextbox extender password and its username. If you would like to reset the Nextbox extender password, then go on the Nextbox setup page and configure your password through security encryption settings. It allows you to configure your wireless device password and another setting easily.

Steps for the Nextbox WiFi Extender Configuration

Through the nextbox wifi extender setup page, you can easily manage and control all the wireless, basic, and advanced settings of your range extender. The following steps are given below that help you to configure your Nextbox wifi extender settings.

Enter in the browser addressing bar re.nextbox.home.
After that, wait for a minute and tap on the login option.
The nextbox login box essentially prompts you for some login credentials.
You will enter in this Nextbox login box, your admin username and a password. If you forgot your Nextbox wifi extender password then you can tap on the Nextbox extender password reset option to reset it. Follow the on-screen given instructions and make a new password.
Now, you will configure your nextbox wifi extender settings.
Go into the setting which is given under the menu option.
Locate it and configure your device all settings by emulating the instructions which are given on your computer screen.
In the end, you will save all the settings to configure your extender properly.

Reset nextbox extender

Following are the steps are given to reset Nextbox wifi extender.

In the beginning, turn on the power of your Nextbox wifi extender.
Then, locate on your Nextbox range extender a reset button and press it.
After that, keep holding the Nextbox extender reset button nattily, if you confront any problem doing it with barren hands utilize a needle or a pin.
Then, keep pressing or holding the Nextbox reset button, until the LEDs switch on for a second.
When the Nextbox extender LEDs turn off, release the Nextbox reset button.
Your Nextbox wifi extender is successfully reset now.
In the end, you need to configure your Nextbox extender settings and use them.

Nextbox wifi extender firmware update

These are the following steps given below to the Nextbox wifi extender firmware update.

Search on the web page http //re.nextbox.home.
Login to your Nextbox extender admin page.
Enter in the Nextbox login account, your admin username and password.
Type both of their credentials and login it,
After that, go on the Nextbox extender setup page.
On its setup page, a mess of settings is given in the Nextbox extender settings section.
You just go into the menu field and choose the support option under the advanced settings.
Then, locate the latest version of the nextbox extender firmware update.
It is the latest version available then click on it.
Now, your extender will start updating.
When it’s updated, kindly confirm that it works adequately with their latest firmware.

Nextbox wifi extender not working

The Nextbox extender occurs due to a lot of reasons. So, firstly you know all the reasons behind it. By knowing about the reason behind the issue occurring, you can easily solve its issues. These are the following reasons for the Nextbox wifi extender not working.

It’s occurring due to the damaging cable.
Not connecting the power cable adequately.
Surely, its internal hardware parts can be damaged.
Maybe you are not connecting its power cable perfectly with its power port.

So, these are the reasons which generally make the Nextbox wifi extender not working issue. You can troubleshoot it by reconnecting your Nextbox with the power. Also, use a better electrical socket to connect it with the power.

Nextbox wifi extender review

The Nextbox range extender is built-in with advanced technology and a mess of features. All the features of this wireless range extender make its working ultimate. You can get a 100% of its working performance due to its including amazing technological features. The Nextbox range extender arrives with a lot of specifications that are mainly included in this device to keep in mind customers’ all needs or other requirements. It is the most compatible wifi range extender, you can easily complete the Nextbox range extender set up with your host device. This helps you to extend your host device network in your home in all congested and dead zone locations.

2022 Best Models Of The Nextbox wifi extender

Following are the best 2022 Best Models Of The Nextbox wifi extender.

NEXTBOX WiFi Extender 1200 Mbps – 2.4 and 5GHz Dual Band
WiFi Extender 300 Mbps with WPS Internet Signal Booster
LazyPro Nextbox WiFi Extender 750 Mbps
LazyPro Nextbox WiFi Extender 1200 Mbps
LazyPro Nextbox WiFi Extender 1200 Mbps
NEXTBOX WiFi Extender 1200 Mbps – 2.4 5GHz Dual Band

Consequently, these are the following best 2022 models of the Nextbox wifi extender.