Search for:
d link dap 1320 extender setup

Having trouble connecting your Wi-Fi at home? Now getting Wi-Fi signals because you have a wall between you and your router? Well, say goodbye to dead zones and buffering videos! This is the age of super-fast internet speeds and interruption-free media consumption. The D-Link DAP-1320 extender is a class product that offers some amazing features along with extending your Wi-Fi. Being so compact and affordable this extender is ideal to push limits and increase the Wi-Fi connectivity range of your main Wi-Fi signal to your basement, backyard, and other regions having a lot of walls and obstructions to the signals. It delivers speeds up to 300 MB/s covering an area of 150 square feet. Has dimensions of 6.28 x 4.75 x 2.95 inches. It weighs around 2.43 ounces. Here we will learn D-link dap 1320 setup

D-Link 1320 LED Indicators

  • Red – The extender is booting up and is getting ready for use.
  • Blinking Amber – The extender is not connected to a wireless router yet or has a very poor connection.
  • Blinking Green – WPS button has been pressed and it is trying to connect to the nearest Wi-Fi network.
  • Solid Green – The DAP-1320 extender has successfully connected to a WI-FI network and is ready for use.

Setup dap 1320 repeater via Browser

  • Plug the D-Link DAP-1320 to a power supply and it should blink a solid ‘red’ color on the LED indicator for a minute or two and then after some time it will start blinking in an orange color indicating it is ready to be setup.
  • In your computer or laptop, enable Wi-Fi and select the Wi-Fi network having the name (SSID) of ‘dlink-68BE’. The ‘SSID’ and its appropriate ‘Password’ will be given in the configuration note that is included in the box as a piece of paper.
  • Once you connect to the network, open the web browser in the same device and search ‘http://dlinkap/’
  • The first page opens up, click on ‘Next’. Select the ‘Manual’ option and click on ‘Next’.
  • It will search for Wi-Fi networks around it and once it does that you will be redirected to a page that contains the list of Wi-Fi networks around you. Select the Wi-Fi network that matches the SSID of your main Wi-Fi router having internet access.
  • Click on ‘Connect’ and on the next page enter the ‘Password’ of the same network and click on ‘Next’ to complete the setup.
  • On the next page, you will need to edit/modify the name (SSID) and password of the extender’s network that you will extend from now on. Click on ‘Next’ to continue.
  • You can now verify all the settings done. Once you’ve verified it, click on ‘Done’ and wait for a minute for the settings to be applied and the extender to reboot.
  • You can now reconnect to the extender’s (modified) SSID using the password that you created earlier.

Dap 1320 repeater setup via WPS

  • Plug the extender into a power source quite close to the main Wi-Fi router which you wish to extend.
  • Wait for the extender to boot up. The LED indicator will glow ‘red’ in color and then blink bright ‘orange’.
  • Press the ‘WPS’ button on the router (or) AP.
  • Now, press and hold the ‘WPS’ button present on the D-Link DAP-1320 on the left side for a couple of seconds until the LED starts blinking green. Then release the button. Once, the extender has connected to the Wi-Fi router, it will glow a ‘solid’ green color.
  • Move the DAP 1320 extender according to the signal that it receives from the router and how much you receive on your devices. Placing it halfway between the Wi-Fi router and your room will be ideal for stable and consistent internet speeds. Now the D link dap 1320 setup is complete.

Dap 1320 setup via Mobile App

  • Make sure your main Wi-Fi router and DAP-1320 extender is connected to a power source and is ready to use.
  • Install the QRS app on your smartphone to complete the setup.
  • o App Store: https://apps.apple.com/gb/app/qrs-mobile/id492593992
  • o Play Store:
  • https://play.google.com/store/apps/details?id=com.dlink.QRSmobile&hl=en_GB
  • Open the QRS app on your mobile device and click on ‘Start’ on the first page.
  • The app will automatically detect the operation mode of the device. So, click on ‘Next’.
  • It will now scan for any available Wi-Fi networks in the close range around it. Select the Wi-Fi network that you wish to extend and enter its password.
  • Click on ‘Next’. Now, enter an ‘SSID’ and ‘Password’ for the new network of your extender.
  • On the next page, you will have to enter an administrative ‘password’. Click on ‘Next’. Now you will be redirected to a page to verify the settings made. Once done, click on ‘Save’ to complete the setup and save changes.
  • It will take some time to reboot the extender and make changes.

Upgrading the Firmware of Dap 1320

  • Visit ‘https://support.dlink.com/ProductInfo.aspx?m=DAP-1320’ to download and save an offline version of your extender’s firmware on your computer to install it manually.
  • Make sure the D-Link DAP-1520 Wi-Fi range extender is connected to a power supply and is connected to the router and has an Internet connection.
  • Connect your computer, laptop, or mobile device to the DAP-1520 extender. Open the browser in the same device and enter ‘http://dlinkap.local’ in the address bar.
  • Upon reaching that page you will have to enter the administrative password. Enter your administrative password or if you hadn’t made any changes to the password, leave it blank and click on ‘Log In’.
  • Now, click on ManagementUpgrade. If you wish to do an automatic update to the firmware, you will need a stable internet connection. Click on ‘Check for new firmware’ under the ‘Firmware Information’ menu. It will check for new firmware versions and click on ‘Upgrade Firmware’ if any new version is available to install it automatically.
  • If you wish to do a manual firmware upgrade, click on the ‘Select File’ button under the ‘Upgrade Manually’ option and click on the firmware file (.bin) that you had downloaded and saved on your desktop earlier. Click on ‘Open’ and now the device will automatically
  • restart within a couple of minutes for saving the changes and upgrading the firmware.
The Cudy WR1000 Ac1200 Router Setup and Installation guide

We all are aware of how COVID-19 is keeping so many people working from home and hence there is no denying that your Wi-Fi router is doing a lot more than helping you stream movies and play games. Home Wi-Fi routers keep millions of people working and they are also connecting an ever-growing range of smart home devices. That means picking one that does the best job for both you and your wallet is trickier than ever. It will not be wrong to say that our daily life is incomplete without a good WiFi Internet connection. Isn’t it? Well, the same applies to a good WiFi router as everyone is going cordless these days. There are a lot of websites that describe the best router, but most of them are just filled with nothing but outdated WiFi routers that no longer work with the latest Internet technology. In this article, we cover Cudy WR1000 AC1200 Gigabit Wireless Router that will handle your current and future wireless networking needs.

Features of Cudy AC1200 Router

Connectivity

Cudy WR1000 AC1200 Smart Wi-Fi Router WR1000 offers next-generation Wi-Fi connectivity, which will provide a wide area of coverage and better speed for uninterrupted working. It comes with an AC1200 Wi-Fi Router WR1000 that has dual bands – 2.4GHz 300Mbps and 5 GHz 867Mbps Wi-Fi Speeds. You can do simple tasks like emails, web browsing, and music listening using the strong 2.4GHz 300Mbps Wi-Fi. At the same time, play online games or stream HD videos using the crystal 5GHz 867Mbps Wi-Fi.

Security

Regarding security, Cudy AC1200 WR1000 ensures high security across the network keeping you safe while doing online tasks. Malicious packets are prevented from entering the network with Firewall protection. Mac and IP Filtering helps in blocking unknown clients. Separate access is provided for the Guest network isolating from the family network. Also, parental control function helps in limiting access for kids and also helps in preventing phishing.

Dual functionality

The best part is the Cudy WR1000 AC1200 router is 2-in-1, not only a router but can be used as a range extender also.

Description

  • Dual-Band Wi-Fi Router
  • 2.4 GHz 300Mbps + 5 GHz 867Mbps Wi-Fi Speeds
  • 5dBi High Gain Antennas for large home coverage
  • Built-in Firewall protect your home network
  • Guest network protect your privacy
  • Support VPN passthrough for IPSec, PPTP and L2TP
  • Compatible with IPv6
  • Easy wireless security encryption at a push of WPS button

How To Log Into Cudy WR1000 Wireless Router?

Here are the steps to log into Cudy WR 1000 Wireless Router:

  1. Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
  2. Type 192.168.1.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router’s web-based user interface.
  3. You should see 2 text fields where you can enter a username and a password.
    • The default username for your Cudy WR1000 V1 is admin.
    • The default password is admin.
  4. Enter the username and password, hit Enter and now you should see the control panel of your router.

What is the Default Login for My Cudy AC1200 Router?

The default logins for Cudy WR1000 are as follows:

  • IP Address: 192.168.10.1
  • Username: admin
  • Password: admin

Note: If you are not able to log in to your router, then you are probably entering the wrong username or password. Remember to make a note of both after you have changed them.

How to Install Cudy wr1000 AC1200 Router via Android /iOS

The following are the steps to install Cudy WR1000 Wireless Router through Android/iOS:

  1. Connect the Router to power.
  2. Open the phone WiFi settings.
  3. Search the WiFi name of your Router.
  4. Then open the browser and type 192.168.1.1 and click enter.
  5. Click the Wireless Repeater option.
  6. In the dialog box, choose the Range Extender option, then choose the network you want to extend.
  7. Enter the WiFi password and click Save/Apply.

How to Install Cudy AC1200 Router via Computer?

The following are the steps for Cudy Router setup through Computer
1. Connect the LAN ports of the router to the computer with a network cable.
2. Connect DC IN Ports with Power adapter.
3. Open the browsers and type 192.168.1.1 or ap.setup in the URL and hit Enter.
4. In the dialog box, choose the Range Extender option, then choose the network you want to extend
5. Finally enter the WiFi password and click Save/Apply.

How to reset the Cudy AC1200?

Here are the steps to reset your Cuddy AC1200 Wireless router:

  1. Clicking on the reset button at the back or at the bottom of your router.
  2. Hold down this small button for approximately 20 seconds, (you may have to use a toothpick)
  3. Your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert’s assistance in this regard.

Note: If you do not have enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic

Why is the Cudy WR1000 Router Page Not Loading?

If the login page is not loading, make sure the device you are using is connected to the wi-fi. You will also need to check if the wrong router IP address is set as the default one.

Having Issues Loading/Problems With Speed on Cudy WR1000

In this case, your network is probably using a different IP address. If this occurs, consult our IP address router list, and locate the right address. If you need any help, check out our tutorial on how to find your router’s IP address.

Final Words

We understand the criticality of the current situation and hence, in this article we covered one of the best wireless routers out there in the market – Cudy AC1200 Wireless Router. With Cudy WR1000 AC1200 router in-home or office, you can enjoy high performance, more flexible internet connection, and secure working/browsing over the WiFi network. We also covered the common issues faced by the Wi-Fi router users and their solutions. We will come up with solutions to more issues.

Coredy e300 Wifi range extender Setup

If you are facing trouble in streaming, playing games, and doing your office work, then Bring home the brand new Coredy e300 Wifi range extender. The wifi range extender boosts your signal strength and improves the actual wifi signal. Here we will learn about Coredy e300 extender Setup-

Wifi range extender

A wifi range extender is an electronic device that boosts and extends your wifi network and signal eliminating the dead zones of your house.
It works as a medium or bridge between the wifi router or access point and the devices that are out of its range. E300 transfers the wifi signal to the dead zones of your house or office.
It receives the signal from the data generating device( router, mobile, or computer) and repeats it to the other parts of your house.

Why should you use the Coredy e300 extender?

The Coredy e300 extender comes with multi-function technology and also works as an extender as well as a router or access point.
This extender is laced with high-technology that enables seamless connectivity even in the dead zones of your house.

Coredy e300 extender setup

The e300 extender setup has two steps:

  1. Powering on the extender
  2. Connecting the extender with an existing network
Powering on the extender

Before going to any further steps, you need to power on the e300 extender to enable it to connect with the available networks.

  • Turn on the extender using the power on/off button.
  • Set the mode switch button to ‘repeater’ to use the device as a network extender.
  • Plugin the extender to a power source. (If possible, in the same room where the router is connected.)

Note: The extender should be put close to the access point when
connecting for the first time.

Connecting Coredy e300 extender to an existing network

The extender can be connected to an existing network in two ways that are:

  1. Using WPS
  2. Using a web browser

Connecting Coredy e300 with a web browser

  • Open the wifi network manager software on your mobile device or computer and search the extender name i.e ‘Coredy e300’ by default.
  • Click on the extender’s name and enter the pin or password to connect your mobile device or computer with it.
    ( The password or pin is printed on the extender’s rear panel.)
  • Open a web browser in your device and search ‘http://ap.setup/’ or enter the IP address 192.168.10.1 in the address bar.
  • If required, login to the admin page by entering ‘admin’ as both username and password (Both are in lowercase).
  • Go to mode wizard and select the repeater option.
  • Click on the select button to choose the network you want to extend. Refresh the list if the network list is not loaded properly.
  • Enter the password or pin of the existing network in the space.
  • Click on apply and wait for some minutes for the extender’s restart.
  • Search and connect to the extended network. (You have to enter the same password you entered while connecting to the extender).

By default, the new name of the extended wifi network is ‘ Coredy
E300_Ext’.

Note: If the connection is not established with the new wifi network, the WLAN led will keep blinking, and the new network name will not be updated.

  • Unplug the extender and shift it to about halfway between the weak zones or dead zones of your house and the router.

Note: Make sure that all three WLAN LED lights amber at the same time(this indicates a suitable position, region for the extender).

Tip: Place the extender at a higher region so it has minimum barriers such as walls, ceilings, and windows.

Coredy e300 wifi extender setup via WPS

The Wi-fi protected setup (WPS) comes with most of the routers and repeaters to make connecting to a secure and protected wireless network from a computer or other devices easier and simple.
The WPS setup allows you to connect to a wireless network without entering the username and password.
Different manufacturers use different terms for the WPS button:

  • Push ‘n’ connect
  • Wifi simple configure
  • PBC
  • Quick secure setup(QSS)

The steps to connect to a wireless network using the WPS button are the following:

  • Press the WPS button present at the extender’s front panel. (The WPS led will blink after turning on.)
  • Wait for 1-2 minutes and then press the WPS button of the router or the access point.

The network name will automatically change to ‘Coredy E300_Ext’ after a successful connection. Also, the WLAN-1 LED will turn amber.

  • Confirm the connectivity via the wifi device or the computer.
  • Unplug the extender and shift it between halfway between the
    router/access point and weak zones/ dead zones of your house or office.
  • Place the extender to a higher, upraised location enabling a minimum of barriers such as walls, windows, and ceilings.
  • Find and connect to the wifi network after shifting the extender from the computer or other device.

Note: Make sure that all three WLAN LEDs are blinking.

Using coredy E300 as an Access Point

The coredy E300 wifi extender allows you to use it as an Access Point for data transmission in your house or office.
The access point is networking hardware that allows one or more wifi devices to connect with a wired network.
It connects to wired switches, hubs, and routers via ethernet and emits a Wireless local area network(WLAN, wifi) at a selected place.

Configuring the Access Point

  • Switch the access point to on by turning the On/off button to on. Change the mode to access points.
    The mode switch is present at the side part of the extender/repeater.
  • Plugin the access point to an electrical switch.
  • Connect the access point to the wired port using the ethernet cable that came along with the access point/extender.
  • Open wifi manager in your computer or device and search the access point network name Coredy E300.
  • Select the connect option and enter the username and password or PIN number present at the AP’s label rear panel. (If required)
  • Open a web browser in your device or computer and enter
    http //ap.setup admin or http://192.168.10.1/ in the address bar.
  • Enter the username and password on the open page. (Both the username and password is admin).
  • Go to mode wizard and select the option access point.
  • Select the security as WPA2/WPA mixed and enter the security password or pin in the key field.
  • Click on apply and wait for a minute for the access point’s reboot.
  • Search and connect to the new wifi network on your computer or device.

Note: The access point will generate a new extended wifi network named ‘Coredy E300’ and has the same password to the device’s wifi network.

coredy e300 wifi extender setup as a router

The Coredy E300 wifi extender setup comes with multi-modes and can also be used as a router.
A router is a wireless hardware that connects to a modem directly via a wired connection. It communicates and creates a network with your wifi network using the in-built antennas enabling internet reach to a wide area in your house or office.

Configuring the Coredy E300 router

  • Take a modem, prepare it, and unplug it from the power source. (If it has a battery backup, remove it).
  • Connect the modem’s cable to the Coredy router’s blue WAN port. Then insert the battery inside the modem.
  • Turn on the Coredy router/extender by switching the on/off button to on. Select the mode as Coredy e300 router from the mode change option.
    (The mode switch option is present at the side panel of the router).
  • Connect a device or computer to use the ethernet cable or connect to the wifi network.

Tip: We prefer using a smartphone for connecting to the wifi network. Find the wifi network named ‘ Coredy E300’ and enter the password or PIN number present at the router’s label.

  • Open your preferred web browser on your computer or device and enter http://ap.setup/admin or http://192.168.10.1 in the address bar.
  • Enter the username and password if asked(both are admin in lowercase).
  • Select coredy router on the mode wizard option.

configure the internet connection by obeying the following steps:

  • Your ISP will provide these details:-
    The ISP configuration details for the DSL account
    DSL username and password
    Static or dynamic IP address
  • After receiving the details, if the service provider is offering you these DSL details, choose ‘ADSL Dial-up(PPPoE) and enter the username and password received for the DSL.
  • Be sure that the security type is WPA/WPA2 mixed and enter the
    password in the key field.
  • Click on apply and wait for some time for the router’s reboot.
  • Positioning the router
  • Make sure to position the router within the operating range of the wireless network.
  • Place the router at the central access point(if possible).
  • Make sure the router is connected to an AC power outlet as well as an ethernet cable.
  • Also notice you have minimum barriers between the router and the access point.

Note: If the network speed is still low, try to change frequencies for its solution.

Coredy E300 wifi extender Power LED light status WPS LED status

The extender’s WPS, WAN/LAN, and LAN Power led blinks in multiple colors to indicate multiple statuses of the extender.
The LED’s light and its statuses are:

  • Lit amber: It indicates the starting of the extender/router/access point.
  • Blinking: It indicates that after pressing and holding the WPS button for three seconds, you are able to use WPS for linking to a wifi network and the linking is successfully in progress.
  • Off: It indicates that the extender/router/AP is powered off i.e not connected to a wifi network or power supply.

WAN/LAN LED status

  • Lit amber: it indicates that the extender/router/AP is starting.
  • Blinking rapidly: It indicates the transfer of traffic by the port.

LAN LED

  • Lit amber: It indicates that the extender has detected an ethernet connection to the AP or any other device.
  • Fast blinking: it indicates the transfer of traffic by the port.
  • Off: it indicates the absence of an ethernet connection.
ap setup

WAVLINK ARIEAL G – AC1200

WAVLINK AC1200 High Power Dual Band WiFi Range Extender setup using ap.setup
The speed provided is incomparable with other Wifi Boosters with 5GHz 900Mbps and 2.4GHz 300Mbps.

Beamforming Technology– Remain always connected to your Internet with the help of latest beamforming technology. It works by providing bandwidth to your appliances even when you move around.

The different mode in just one device– Router Mode for the time when you want to use it as a router. Repeater Mode when you want it to wirelessly extend the signals for you. AP Mode works as a hotspot when connected with an ethernet cord to your router.

Installation within 10 seconds– Push WPS and the extender will configure with your router.

Wavlink AC1200 Setup via browser

  • Firstly, Plugin your device right next to the router and wait till the power LED gets stable.
  • Now you need to switch the button on the left side of your repeater to the repeater mode.
  • Wait till the lights get stable.
  • Grab any of your devices like computer or laptop and look for wavlink wifi network in the WiFi list. It will come up Wireless-N or Wireless
  • After connecting to the network open a browser and in the URL type http://wifi.wavlink.com or 192.168.10.1 or ap.setup.
  • When asked for a login password type in admin on the setup page.
  • Follow the on-screen instructions and setup your wavlink ac1200 repeater.
ALC AMR300N Wi-Fi Repeater Setup, Troubleshooting, Review

No doubt, if you use a WiFi router at your place, you are familiar with the WiFi repeater too. Wi-Fi repeater is also known as WiFi extender. Even though the name sounds different, the product and its functions are the same. However, a WiFi extender or a repeater extends the range of your existing WiFi network, just like its name implies. It doesn’t need any fresh device to boost the range of your current device, as it amplifies the network blanket of your existing WiFi router. As there are several options that are available for the WiFi router, you will get several WiFi extenders, depending on your choice. However, the specifications will be varied for each of them. Talking about the topic of this article, ALC AMR300N Wi-Fi Repeater.

The Wi-Fi extender provides the single with a WiFi frequency up to 2.4 GHz. Its coverage can be made up to 300ft LOS. Also, you can expect a maximum speed of up to 300mbps from the device. The operation temperature of the AMR300N Wi-Fi Repeater is in the range of 32°F -104°F. And, you don’t have to worry about its security. As the devices have all the security functions with WEP, WAP, and WAP2.

And, this is not all, the device is available with many more features. You will get to know every detail about the device, once you go through these words. So, please have a look.

ALC Extender Features

Everyone picks up electronic gadgets depending upon, what features the device has. And, once you go through this list, I’m sure, you won’t look for another option for a WiFi repeater or extender. Please have a look at the amazing features of AMR300N WiFi router.

1) Wireless Ethernet

Add an Ethernet port where you didn’t have one preceding. The Wi-Fi Repeater incorporates an Ethernet port to connect your “wired” gadgets and afterward sends remotely to your switch.

2) Eliminate “Dead” Zones

Lift your Wi-Fi signal in the dead zones of your home by adding the Wi-Fi Repeater.

3) Plug and Play

The Wi-Fi Repeater just plugs into an AC source for power and rapidly associates with your Wi-Fi switch with a press of the WPS button.

4) 300 Foot Range

The Wi-Fi Repeater has a scope of up to 300ft with an immediate view.

5) 2.4GHz Compatible

The Wi-Fi Repeater works using the 2.4GHz recurrence, which is the most well-known kind of Wi-Fi utilized.

6) Secure

The Wi-Fi Repeater Security highlights WEP, WPA, and WPA2, a similar sort of security utilized in Wi-Fi switches today.

How to Setup ALC AMR300N Wi-Fi Repeater?

Set up a cycle of the WiFi extender or repeater isn’t as protracted as the WiFi switch. Set up of WiFi expanded will pardon a couple of steps that you may have performed during the WiFi switch establishment. Here, you will realize, how to setup AMR300N Wi-Fi Repeater without any problem. Along these lines, we should move further.
The most precise technique for connecting the unit is using the WPS button.

  1. Plug Extender into standard divider source having 120V. In the wake of finishing establishment, you can change the area of the Extender.
  2. Press and hold the WPS/Reset button for two seconds until the Status LED begins blinking quickly.
  3. Within two minutes, press the WPS button on your remote switch for a few seconds.
  4. This Extender will reboot and then link with your remote switch. Note the Extender’s name (SSID) will be equivalent to your home Wi-Fi in addition to “_EXT” on the end. Ex. homewifi_EXT

Things to remeber while doing ALC extender setup

: If the WPS work isn’t working or the Status LED doesn’t flicker, reset the unit by pressing the WPS/Reset button for six seconds.

Kindly take note:

If you need to keep the steady connection between your switch and this extender while using the Extender mode, try to introduce this Extender in the most reasonable position.
An incredible method to do this is by checking the Wi-Fi signal on your cell phone after this Extender is introduced. In case that the sign is under 2 bars, we suggest changing the area.

Setup AMR300N Wi-Fi Repeater via the web browser

  1. Plug Extender into standard divider source having 120V. After establishment, you can change the area of the Extender.
  2. On a phone, go to your Wi-Fi settings and select ALC Wireless-N. You may get a message expressing the Internet isn’t accessible, this is ordinary. No password is required.
  3. Open a program and enter ap.setup or 198.168.10.1. The login screen will show up. Enter the default password, “admin” and hit Login.
  4. The Wireless page will show up. Hit Wizard at the lower part of the page. On the Wizard page, click Repeater.
  5. Select your Wi-Fi range and enter its password. Name your Extender in the Extender SSID field. Hit Connect.
    Return to your telephone’s Wi-Fi setting and select your new Extender’s SSID. Whenever asked after the Extender reboots, enter your primary Wi-Fi password.
  6. Go back to the internet browser and hit Back. Enter admin as password again to return to the Extender site page. Select Setup at the lower part of the page. Select Time Zone and snap Apply. The Extender is currently prepared to utilize.

AMR300N Extender Led Status

Every LED has some meaning. Like, universally, red light is for danger, and green light is for safety. Likewise, the AMR300N Wi-Fi Repeater or extender also has some Led lights on it which has some meaning behind its ON, OFF, or blinking process. You will learn the meaning here:

  • ON: If the Led light is powered ON, it indicates that the device is ON and it is working properly.
  • OFF: If the Led light is powered OFF, it indicates that the extender is not receiving the electrical power.
  • Slow Flashing: If the Led light is flashing slowly, it means that the device network is disconnected.
  • Fast Flashing: If the Led light is blinking fast, it indicates that your device WPS is connecting to the router or AP.

Reset

Sometimes, you feel that the device is not working properly or any other issue, and you need to reset your device.
So, to reset your Wi-fi extender, please press or switch the reset button and wait for 10 seconds. Switch it back on, or release the button. This will reset all the previous settings and will allow you to modify them as per your needs.

AMR300N Wi-Fi Repeater Firmware Update

What firmware update means?
t is nothing but the process in which you update the version of your device, where, the firmware upgrade replaces the older version of your software with a new one or fix the bugs.
To proceed with the process of firmware upgrade for AMR300N Wi-Fi Repeater you can go with the process given below:

  1. Go to the Setup
  2. Visit Firmware Upgrade located at the web management interface. A popup window will appear on the screen.
  3. Hit Browse or Choose File. You will have to select a firmware file to upgrade. You can download the latest version through its website.
  4. Hit Apply
    And the system will start upgrading the older version with the new features.

Issues and their Resolutions

How can I change the password of AMR300N Wi-Fi Repeater?
Everyone knows that the default password is Admin, and everyone can see it. If you don’t change it, it can be a security issue. So, it is always advisable to change the default password. How to do that? Well! It is not at all a tough operation. Have a look:

  1. Please hit Setup
  2. Hit the System Safety menu on the web management interface. And you will see a popup window is opened on your screen.
  3. Kindly hit the Apply button.
    And your work is done.

AMR300N Wifi Extender Review

I bought this WiFi extender because our switch is toward one side of the house and our temple, where our widescreen television is found, is at the opposite end, around 64 feet away, with five dividers in the middle of them and when viewing YouTube recordings the sign was continually dropping, making the recordings buffer. It is turning out brilliantly for that.
I was needing a WiFi extender that had an ethernet port on it and I thought this one had one since it says in the portrayal that it has “Wired Connectivity: Ethernet”.
With the picking up of this device, my search is finished for a good WiFi extender. I am happy with the features of the AMR300N WiFi is providing. And, no doubt, I will recommend this extender to each one out there who are looking for a good option. Highly rated.

Get setup with ap.setup for other details.

AIGITAL WiFi REPEATER SETUP, TROUBLESHOOTING

AIGITAL WiFi Repeater Setup is available here. AIGITAL WiFi Repeater also known as Aigital WiFi Extender is a gadget which is use for extending the signal strength of the WiFi network. It is done with just three steps-

  1. Recognizes and accepts the signal available
  2. Amplifies it
  3. Circulates the amplified signal

In simpler words, it helps to boost the strength of the WiFi coverage. It provides high-speed internet connection and one can effectively stream their favourite shows, chat, play online games, and a lot more. For installation, it takes only a couple of minutes and for the fastest internet speed, you must install it somewhere the extender works halfway between the router and the dead zone.

Advantages of AIGITAL WiFi Repeater:

  1. It increases the coverage of the WiFi to the areas that the box could not reach may it be the corners of the house or the backyard.
  2. Due to its consistency and compatibility, it can extend the WiFi coverage from any device or available router.
  3. It allows one to connect devices via wired connectivity with its ethernet port e.g desktop, laptop, television, phone, game console, etc.
  4. It ensures high-performance speed.
  5. Its two powerful antennas enables strong and stable connectivity which can even penetrate the walls.
  6. Due to its sleek and portable structure it can fit flawlessly into your decors and the wall socket makes it easy to move and deploy flexibly.
  7. Once it is set up, there is no need of the second configuration, just plug and play.
  8. It is ideal for homes and offices.
  9. Cost effective and budget-friendly.
  10. It avoids buffering while streaming shows online or browsing anything.

How to set up Aigital WiFi Extender:

1. Wireless set up-

Here is the AIGITAL WiFi Repeater Setup is available. You just need to follow the AIGITAL WiFi Repeater Setup for the best performance.

  • Plug the AIGITAL WiFi Repeater or extender into the socket.
  • Connect to the WiFi signal; you can do this either on phone or computer.
  • Open the browser.
  • Type the IP address 192.168.10.1 in the address bar and click “GO”.
  • Type your login password.
  • Scan and select the home/office WiFi.
  • Type the WiFi password of your place’s in the Wireless Password space.
  • Set a new WiFi Extender’s SSID and password and click “NEXT”.
  • It will be your WiFi extender’s name, search it and connect. Your AIGITAL WiFi Repeater Setup is complete.
2. Wired set up-

To have a wired connection, all you have to do is connect the WiFi extender and the require device via the Ethernet cable. And Bingo! you can access the internet connection directly.
Types of Modes in Aigital WiFi Extender:

  1. AP Mode- It provides wired connectivity to wireless. It is recommended to use at home, workplaces, etc.
  2. Repeater Mode- It is used to strengthen wireless coverage.
  3. Router Mode: It is used to share one wired WiFi connection to several people present at a place. Since it can support numerous connection types, more than one user can share the internet easily.
  4. Bridge Mode- It can build two individual networks for groups of users sharing one internet. It is used in cafeterias, bars, homes, offices, etc where one can use the internet service without the need for a password.
  5. Client Mode- It helps to connect to a wired device and works as a wireless adapter.

AIGITAL WiFi Repeater Setup: Light indication-

The extender has LED signal indicators to locate the area which is best for the placement for strengthening the signal. In simpler words, it shows the status of the device. The difference in colours and pulse implies the performance of the device. And it is important to note that colours are different for different WiFi extenders.
Things to take care of while dealing with Aigital wireless extender:

  1. Your connection speed may decrease if you place your device farther from the extender. As wireless devices use radio technology, there is a decrease in connectivity if there is an increase in the distance in between.
  2. If there is a mismatch in settings of the extender and router, you will not be connect to yo our wireless network. Hence, both the setting should be the same.
  3. You may experience network issues if the firmware of your extender is outdate. Hence, for the proper connection, you need to update the firmware of your device.
  4. If you see a problem of password error then you need to enter your password correctly. You will be connect to your preferr wireless network only when your username and password is right.
  5. Sometimes you may not see the available network. Just check if the WiFi icon on your gadget is active and turn on if it is not then the problem lies in your cable modem.

Steps to reset your AIGITAL WiFi Extender:

If your AIGITAL WiFi Repeater or Extender does not accept your password, you may reset your device.

  1. Plug the extender near your WiFi box into the socket.
  2. Perform the factory reset (you can do it by holding the reset button with the help of a paper clip or toothpick).
  3. The light on the extender changes.
  4. Wait for a couple of minutes and then connect your devices to the WiFi network.

Features of AIGITAL WiFi Repeater 1200 Mbps:

  1. It has two ethernet ports which can be connects to any wired devices such as smart TV, printer, computer, game console, etc.
  2. Has four strong antennas with a WiFi coverage up to 3000 sqft.
  3. It speeds up to 300Mbps for 2.4GHz and 867Mbps for 5GHz and has wide range compatibility.

Features of Aigital Wireless Extender 300 Mbps:

  1. It ensures a stable connection with 2.4GB signal band and 300Mbps transmission rate can set up conveniently with a phone or a computer just within three minutes.
  2. Can be connected with all routers and home WiFi devices due to its universal compatibility giving a longer range well as stronger passing-wall ability.

This Aigital WiFi extender comes with the easy installation procedure and helps you to strengthen the existing WiFi to the longer range so you can use WiFi connection at any areas at home. Now you can say goodbye to buffering of WiFi and enjoy browsing anything with ultrafast connectivity.

YOU MAY ALSO LIKE:

ALC AMR300N Wi-Fi Repeater Setup

How to setup wireless N Wifi Repeater 192.168.10.1

Having issues with your wifi connection? Try new wifi repeater which extends your signals to your workshop, swimming pool, garage, etc. Now you don’t have to worry about losing connection when you step outside your room with your laptop or cell phone. Its small size makes it fit in any wall socket taking the least space possible. Wireless N repeater comes with a quick setup guide, one ethernet cable and the unit itself. Let’s begin the wireless n wifi repeater setup via 192.168.10.1 and WPS-

Configure wireless N repeater via web GUI

  1. Once you plug in the extender to an electrical outlet, the power light will turn green and the wifi light will blink.
  2. The next step requires you to connect the repeater to your computer or cell phone either through wifi or via ethernet cable.
  3. For wifi, you need to go to wifi list on your laptop or cell phone and look for the “Wireless N” network name and connect to it.
  4. Ethernet connection can be established by connecting ethernet cable from extender to your computer/laptop.
  5. So, after the Extender is connected with your either or computer/laptop/cell phone you can go for a web-based setup.
  6. Open any browser on your respective devices and in the address bar type 192.168.10.1.
  7. It will open the login page for you, the default username and password for wireless N Wifi repeater is “admin”.
  8. Hit submit, On the next screen under wizard option, you will have to select among Ap mode or repeater mode.
  9. It will now scan and show you the list of wifi network names available, select your router wifi name.
  10. Enter the password for the same to complete wireless N Wifi repeater setup.
  11. Hit apply, it takes around 60 seconds to apply the settings. Later connect your devices with _EXT network showing in your wifi list.

Setup Wireless N Extender via WPS

  1. For this setup, you have to make sure both extender and router are within the same room or in the range of 5-10 feet.
  2. Plugin the extender to the wall outlet and wait till power light gets stable.
  3. Push the WPS button on your router. Depending on the model it can be on the back or on the front.
  4. Within two minutes push the WPS button on the extender as well, wps on both the devices will be blinking.
  5. Usually, it takes just 15-20 seconds to configure the wireless n repeater via WPS.
  6. Once successful WPS LED on extender will turn solid and you will see a new network name in your wifi list.
  7. It will pick the same network name as your router ending with _EXT at the end, the password is also same for the ext as your router.
  8. Click here to download Wireless N wifi repeater manual.

What if u forgot your user name for wireless-n wifi repeater?

Essentially, the Wireless-N WiFi Repeater is designed to exaggerate the signal range of the wireless router. Through this wireless repeater, you can easily boost its signal range in those zones where your router WiFi signal can’t reach or it’s also covered up in dark areas. The wireless-n wireless repeater needs to be set up after its configuration process. It will happen through the browser and WPS function. If you would like to use the user interface then you must need a username and default admin password. Thes both of them are labeled on your extender back panel either you could also create through the browser.

Ordinarily, any kind of device is logged in with a username and password. These are both imperative credentials to access the web admin account of the wireless device. But sometimes the user has not figured out their own username and password. Since it might happen due to forgetting their own password. Usually, the user sometimes forgets their own device’s admin credentials when they have made changes from time to time. So, let’s know about some troubleshooting guides to cope with the causing issue.

Following ways to access for wireless-n repeater settings if forgot username

Once in a while, the user forgets their own device username. Then, in this situation, it is liable to login into the account. Here are the following ways to get rid of the wireless-n repeater forgot username problem.

1. Connect the Wireless-N Repeater Via Ethernet connection

You should follow these below-mentioned steps to cope with the occurring issue.

  • To get rid of the occurring issue by connecting the Wireless-N Repeater with the internet cable.
  • So, let’s connect its RJ45 LAN port with the Ethernet cable. This way helps you to move on the wireless-n repeater setup wizard page directly.
  • Firstly, reconfigure the wireless range extender.
  • After this, connect the wireless router LAN port with your repeater LAN port through the ethernet cable.
  • Now, you have to turn on its power and please wait for a second.
    Its signal light illuminates in a while.
  • After this, connect its network to your smartphone. Make sure it is connected.
  • If it is not connecting then you will click on the setup wizard.
  • After this, configure its network settings and also confirm from there the username. It is automatically manifested on your screen.

Thus, the WIreless-N repeater forgetting password is getting by you. After this, you should use this username to log in to it or share its network.

2. Reset the username if u forgot it for wireless-n wifi repeater

One of the best ways to fix the issue is that you might get rid of this issue by resetting the username.

  • You could resolve the issue by resetting the wireless repeater username.
  • To reset it, first, you have to move on to its wireless admin page.
  • So, let’s access the wireless-n repeater admin page using http://192.168.10.1.
  • Enter the Wireless-N repeater IP address in the URL field.
  • After this, enter the username and password in the browser admin credentials field.
  • Now, you have to be able to access its admin page.
  • So, access it, but it is not accessing due to a typo of username or forgetting it.
  • You have to simply click on the Forgot username or password.
  • After this, kindly type the username if you would like to reset the username.
  • Enter the new username and set it as your wireless-n repeater admin name.
  • Lastly, you will save it and use it to access your networking device admin page.
3. Recover the username if u forgot your user name for wireless-n wifi repeater

The following instructions are mentioned below to recover the forgotten username of the wireless-n repeater.

  • First of all, go into the admin page of your wireless-n repeater.
  • Locate the wireless-n repeater admin page with the Wireless-N repeater with its IP address.
  • Then, you will click on the simple settings menu.
  • After this, enter in the recovery field your username.
  • After this, type it again and confirm that both of the details are correct. If anyone has mistakenly entered something wrong then please correct it.
  • Lastly, after recovering it, you save it and use it to access your wireless-n repeater admin account.

Thus, these are the exhaustive ways. It can be used if u forgot your user name for a wireless-n wifi repeater. So, let’s follow these above-given points and resolve them.

What if you forgot the username of the wireless-n repeater?

Generally, if you forgot your username then you might resolve it by using these instructions. It is as follows:

  • Try to set it up to your device username from time to time, if you wish to keep remembering your device username and password.
  • Moreover, you should reset the username while you have to update it and share its network with the guest device.
  • Sometimes, your Windows shows erroneously about your wireless-n repeater username. So, let’s try to access the web admin page again and seek out the issue.
  • Apart from this, kindly set a username that is correct and always remembers.
  • To set up the wireless-n repeater username, you should only use a simple name. It may not be easy or not be hard to remember it for a new user.

Login to the wireless-n wifi repeater with the correct username

Make sure the username which is forgotten by you is recovered now. So, you will log in to check that the username is working adequately.

  • First of all, confirm that your computer connects with ist network.
  • After that, search into the browser field wireless-n repeater admin panel address.
  • When the Wireless-N wifi repeater login panel appears on your windows screen. Kindly wait for a second.
  • After that, enter in the admin field your device’s correct username.
  • In the next one, enter your repeater wireless password.
  • Once in a while, the wireless range extender automatically catches up with your router admin credentials. In that case, you do not need to enter any credentials.
  • So, in this case, you will just login in and access your range extender administration page.
  • Finally, you will configure the device settings by following the on-screen instructions and saving them.

Thus, these are the aforementioned ways to log in to the Wireless-N repeater. Now, your account has been successfully logged in and settings have changed.

How do add a wireless-n repeater to Linksys 2500?

If you would like to add the wireless-n repeater to Linksys 2500 then, you will first configure your main router first. Ordinarily, the wireless range extender is used to boost the signal range of your existing one. So, let’s boost the signal range of your Linksys 2500 router with this wireless-n repeater. It might be easily joining your Linksys router company. Because it is designed very impeccably to make it compatible with any kind of router. Therefore, if you wish to get a better signal range through your existing device then buy the wireless-n repeater first from Amazon. After this, let’s read all the details about it through its manual. Then, let’s start the process as per the manual instructions.

Steps to add a wireless-n repeater to Linksys 2500
  • Firstly, you have to place it closer to your existing Linksys 2500.
  • After this, connect your router or extender with the power adapter.
  • Make sure the power is turned on. Check it through its signal light.
  • You can add the wireless-n repeater through the WPS button.
  • Hold it and add the wireless repeater with your router.
  • Apart from this, you might add it through the browser.
  • Just, use the wireless bridge mode and let’s pair it with your router.
  • At last, configure the device settings after adding it and get its WiFi extended network into your devices.

how do I make my Asus rt-n12 wireless n router into a repeater?

If you would like to make the Asus rt-n12 wireless n router into a repeater then you have to choose the wireless repeater mode for it. There are the following steps to configure the wireless router repeater mode.

  • First of all, you will have to configure the repeater mode of your wireless router after configuring your device.
  • Locate the browser and go into the Asus rt-n12 wireless n router admin page.
  • You will log in to it and move on to its setup page to configure the settings.
  • Through the network modes, you will choose the repeater mode.
  • After choosing it, make sure your router has connected with a repeater.
  • In this way, you have to follow the on-screen info to finish using your Asus router as a repeater mode.
  • Then, configure the repeater mode and use the internet connection through this mode after the setup.
  • Enter the username in the SSID field and type a password to connect its network.
  • After this, check your device status and enjoy its connection.

how do I reset my netvip wireless n wifi repeater to factory default?

Here are the following steps for resetting my netvip wireless n wifi repeater to factory default.

  • Locate its admin panel on your repeater panel.
  • Visit under the administration settings and click on the factory setting option.
  • First of all, reset the netvip wireless n wifi repeater to factory default settings.
  • Locate on your repeater panel reset button.
  • Use a paper clip or pin to hold the netvip repeater factory reset button.
  • Press and hold this netvip wireless n wifi repeater button for three to five seconds.
  • It is resetting now, so please wait for a second.
  • After this, reset it and get the back connection to get its internet connection.
  • Now, connect the netvip wireless repeater network connection and restart it.

How to reset wireless n repeater?

Here are the following steps to reset the wireless n repeater, that’s mentioned below.

  • If you would like to reset the repeater then locate it on your repeater reset button.
  • Find it and use a paperclip.
  • Insert the pin under the wireless repeater reset button.
  • After this, hold it up to two to five seconds.
  • After a while, release it.
  • Make sure it is reset adequately,
  • After finishing the reset process, then restart it and check its signal light.

How to update the firmware of wireless n repeater?

Following steps to update the firmware of wireless n repeater.

  • First of all, search in the browser field ap.setup.
  • Locket this admin address and login in with the correct details.
  • After this, move on to the wireless-n repeater administration settings.
  • Then, you have to choose from its settings section the firmware update option.
  • Choose the support option.
  • After this, enter your wireless n repeater name and model number to get its latest version.
  • Then, update its firmware by emulating the on-screen instructions.
  • Finally, update the wireless-n wifi repeater firmware.

how to set up wireless n repeater with the wire or ethernet?

Following are the steps to set up a wireless n repeater with the wire or ethernet.

  • First, you will have to place the Wireless-N repeater.
  • Make sure your repeater is placed in an exhaustive signal location.
  • Afterwards, unite the wireless repeater LAN port with your router’s LAN port.
  • Surely, both LAN ports are connected in good condition.
  • Now, you have to connect its power port with the power cable.
  • In this way, you will start its power, switch on its power button.
  • Connect its network with your computer with a wired or wireless connection.
  • Meanwhile, when you start its power its signal lights automatically start blinking.
  • Finally, use its internet and enjoy its seamless internet services.

How to log in to the wireless-n repeater after setup?

You can log in to the wireless-n wifi repeater after the setup with these steps, it is as follows;

  • Enter in the browser URL ap.setup.
  • Search it and move on to its web admin page.
  • Choose the wireless-n repeater login option.
  • After this, enter the wireless-n repeater default password and username.
  • Make sure the wireless-n repeater admin credentials are faultless.
  • In this way, click on login and complete this process.

Why my wireless n repeater not working?

Once in a while, the wireless-n repeater not working due to misconfiguration. So, let’s configure it again and cope with the not working issue.

  • First, you have to set the wireless n repeater again.
  • After this, go to its admin page through the user interface.
  • You might configure the network settings of the wireless repeater again to fix the issue.
  • Modify the settings of the device and let’s configure it.
  • After the configuration, let’s take its internet connection.
  • Make sure it works well.

how to change the network key on a wireless-n repeater?

These are the following instructions to change the network key on a wireless-n repeater?

  • If you wish to modify the password then you will go on the wireless repeater administration settings menu.
  • Choose the advanced settings.
  • Afterwards, to modify the network key, kindly click on the change password option.
  • Enter your wireless-n repeater settings.
  • Then, change its password and confirm it again.
  • In the end, save it to use it while you have to login in.

how to change default password on wireless n repeater?

Here are the following steps to change the default password on wireless n repeater?

  • You can change the default password of the wireless-N repeater through the browser.
  • After this, click on the wireless settings and set your new password to change the default password.
  • Now, let’s configure its password by emulating the on-screen instructions.
  • Change it and set the new password.
  • After this, use this password to get a rapid internet connection.

Thus, the default password on wireless n repeater has been changed successfully. You must use these steps and set it up to its more settings after using it.